dmesg - Intel Core i7-5820K
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-35-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #62-Ubuntu SMP Fri Aug 15 01:58:42 UTC 2014 (Ubuntu 3.13.0-35.62-generic 3.13.11.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000790dcfff] usable
BIOS-e820: [mem 0x00000000790dd000-0x0000000079c4bfff] reserved
BIOS-e820: [mem 0x0000000079c4c000-0x0000000079f1efff] usable
BIOS-e820: [mem 0x0000000079f1f000-0x000000007aaa7fff] ACPI NVS
BIOS-e820: [mem 0x000000007aaa8000-0x000000007afbefff] reserved
BIOS-e820: [mem 0x000000007afbf000-0x000000007afe5fff] usable
BIOS-e820: [mem 0x000000007afe6000-0x000000007afe6fff] reserved
BIOS-e820: [mem 0x000000007afe7000-0x000000007afe9fff] usable
BIOS-e820: [mem 0x000000007afea000-0x000000007afeafff] reserved
BIOS-e820: [mem 0x000000007afeb000-0x000000007afebfff] usable
BIOS-e820: [mem 0x000000007afec000-0x000000007b071fff] reserved
BIOS-e820: [mem 0x000000007b072000-0x000000007b289fff] usable
BIOS-e820: [mem 0x000000007b28a000-0x000000007bff8fff] reserved
BIOS-e820: [mem 0x000000007bff9000-0x000000007bffffff] usable
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000047fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X99 Extreme4, BIOS P1.20 08/04/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x480000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 380000000000 mask 3FC000000000 uncachable
2 base 00007F000000 mask 3FFFFF000000 uncachable
3 base 0000F0000000 mask 3FFFF8000000 write-through
4 base 0000F8000000 mask 3FFFFE000000 write-through
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd820-0x000fd82f] mapped at [ffff8800000fd820]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x47fe00000-0x47fffffff]
[mem 0x47fe00000-0x47fffffff] page 1G
init_memory_mapping: [mem 0x47c000000-0x47fdfffff]
[mem 0x47c000000-0x47fdfffff] page 1G
init_memory_mapping: [mem 0x400000000-0x47bffffff]
[mem 0x400000000-0x47bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x790dcfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x78ffffff] page 2M
[mem 0x79000000-0x790dcfff] page 4k
init_memory_mapping: [mem 0x79c4c000-0x79f1efff]
[mem 0x79c4c000-0x79f1efff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x7afbf000-0x7afe5fff]
[mem 0x7afbf000-0x7afe5fff] page 4k
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x7afe7000-0x7afe9fff]
[mem 0x7afe7000-0x7afe9fff] page 4k
init_memory_mapping: [mem 0x7afeb000-0x7afebfff]
[mem 0x7afeb000-0x7afebfff] page 4k
init_memory_mapping: [mem 0x7b072000-0x7b289fff]
[mem 0x7b072000-0x7b289fff] page 4k
init_memory_mapping: [mem 0x7bff9000-0x7bffffff]
[mem 0x7bff9000-0x7bffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x34c3e000-0x36616fff]
ACPI: RSDP 00000000000f0540 000024 (v02 ALASKA)
ACPI: XSDT 000000007a72b098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 000000007a7558f0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 000000007a72b1d8 02A713 (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 000000007aaa4f80 000040
ACPI: APIC 000000007a755a00 000100 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 000000007a755b00 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 000000007a755b48 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 000000007a755be8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: UEFI 000000007a755c28 000042 (v01 00000000 00000000)
ACPI: BDAT 000000007a755c70 000030 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: HPET 000000007a755ca0 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 000000007a755cd8 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: PMCT 000000007a755d68 000064 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SLIT 000000007a755dd0 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 000000007a755e00 000E58 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 000000007a756c58 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 000000007a756c98 00D647 (v01 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: AAFT 000000007a7642e0 00037C (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: DMAR 000000007a764660 0000C4 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: ASF! 000000007a764728 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x47fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x47fffffff] -> [mem 0x00000000-0x47fffffff]
Initmem setup node 0 [mem 0x00000000-0x47fffffff]
NODE_DATA [mem 0x47fff5000-0x47fff9fff]
[ffffea0000000000-ffffea0011ffffff] PMD -> [ffff88046f600000-ffff88047f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x47fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0x790dcfff]
node 0: [mem 0x79c4c000-0x79f1efff]
node 0: [mem 0x7afbf000-0x7afe5fff]
node 0: [mem 0x7afe7000-0x7afe9fff]
node 0: [mem 0x7afeb000-0x7afebfff]
node 0: [mem 0x7b072000-0x7b289fff]
node 0: [mem 0x7bff9000-0x7bffffff]
node 0: [mem 0x100000000-0x47fffffff]
On node 0 totalpages: 4167063
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 7704 pages used for memmap
DMA32 zone: 493050 pages, LIFO batch:31
Normal zone: 57344 pages used for memmap
Normal zone: 3670016 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x790dd000-0x79c4bfff]
PM: Registered nosave memory: [mem 0x79f1f000-0x7aaa7fff]
PM: Registered nosave memory: [mem 0x7aaa8000-0x7afbefff]
PM: Registered nosave memory: [mem 0x7afe6000-0x7afe6fff]
PM: Registered nosave memory: [mem 0x7afea000-0x7afeafff]
PM: Registered nosave memory: [mem 0x7afec000-0x7b071fff]
PM: Registered nosave memory: [mem 0x7b28a000-0x7bff8fff]
PM: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88047fc00000 s86336 r8192 d24256 u131072
pcpu-alloc: s86336 r8192 d24256 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4101930
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16295540K/16668252K available (7372K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1440K bss, 372712K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-11.
NR_IRQS:16640 nr_irqs:1184 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3298.761 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6597.52 BogoMIPS (lpj=13195044)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28537 entries in 112 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffd000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fbffd000 ver 1:0 cap d2008c10ef0466 ecap f0205b
dmar: DRHD base: 0x000000fbffc000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
dmar: RMRR base: 0x0000007ae34000 end: 0x0000007ae42fff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 1
IOAPIC id 9 under DRHD base 0xfbffc000 IOMMU 1
HPET id 0 under DRHD base 0xfbffc000
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz (fam: 06, model: 3f, stepping: 02)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 2016423 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11
x86: Booted up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (79170.26 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x79f1f000-0x7aaa7fff] (12095488 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 8:11:48, date: 09/07/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: reg 0x10: [io 0x0020-0x003f]
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb13e000-0xfb13efff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0xf130-0xf137]
pci 0000:00:11.4: reg 0x14: [io 0xf120-0xf123]
pci 0000:00:11.4: reg 0x18: [io 0xf110-0xf117]
pci 0000:00:11.4: reg 0x1c: [io 0xf100-0xf103]
pci 0000:00:11.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:11.4: reg 0x24: [mem 0xfb13d000-0xfb13d7ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb120000-0xfb12ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb13c000-0xfb13c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb100000-0xfb11ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb139000-0xfb139fff]
pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb138000-0xfb1383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb130000-0xfb133fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb137000-0xfb1373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb136000-0xfb1367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb135000-0xfb1350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:01:00.0: [10de:1187] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:00: on NUMA node 0 (pxm 0)
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI: \_SB_.UNC0: notify handler is installed
ACPI: \_SB_.PCI0: notify handler is installed
Found 2 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:ff:1e.3: no compatible bridge window for [io 0x0020-0x003f]
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x790dd000-0x7bffffff]
e820: reserve RAM buffer [mem 0x79f1f000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7afe6000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7afea000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7afec000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b28a000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:06: disabling [io 0x0010-0x001f] because it overlaps 0000:ff:1e.3 BAR 0 [io 0x0000-0x001f]
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [io 0x0400-0x047f] could not be reserved
system 00:06: [io 0x0580-0x059f] has been reserved
system 00:06: [io 0x0600-0x061f] has been reserved
system 00:06: [io 0x0880-0x0883] has been reserved
system 00:06: [io 0x0800-0x081f] has been reserved
system 00:06: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:06: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:06: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:06: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x0280-0x028f] has been reserved
system 00:07: [io 0x0290-0x029f] has been reserved
system 00:07: [io 0x02a0-0x02af] has been reserved
system 00:07: [io 0x02b0-0x02bf] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:ff:1e.3: BAR 0: can't assign io (size 0x20)
pci 0000:ff:1e.3: BAR 0: trying firmware assignment [io 0x0020-0x003f]
pci 0000:ff:1e.3: BAR 0: [io 0x0020-0x003f] conflicts with PCI Bus 0000:00 [io 0x0000-0x03af]
pci_bus 0000:ff: Some PCI device resources are unassigned, try booting with pci=realloc
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x1000-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x90000000-0xfbffbfff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26468K (ffff880034c3e000 - ffff880036617000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x750dd000-0x790dd000] (64MB) mapped at [ffff8800750dd000-ffff8800790dcfff]
microcode: CPU0 sig=0x306f2, pf=0x4, revision=0x1f
microcode: CPU1 sig=0x306f2, pf=0x4, revision=0x1f
microcode: CPU2 sig=0x306f2, pf=0x4, revision=0x1f
microcode: CPU3 sig=0x306f2, pf=0x4, revision=0x1f
microcode: CPU4 sig=0x306f2, pf=0x4, revision=0x1f
microcode: CPU5 sig=0x306f2, pf=0x4, revision=0x1f
microcode: CPU6 sig=0x306f2, pf=0x4, revision=0x1f
microcode: CPU7 sig=0x306f2, pf=0x4, revision=0x1f
microcode: CPU8 sig=0x306f2, pf=0x4, revision=0x1f
microcode: CPU9 sig=0x306f2, pf=0x4, revision=0x1f
microcode: CPU10 sig=0x306f2, pf=0x4, revision=0x1f
microcode: CPU11 sig=0x306f2, pf=0x4, revision=0x1f
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1410077507.612:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 31878
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:03.0: irq 66 for MSI/MSI-X
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb138000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb137000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 14:7:169
acpi device:32: hash matches
rtc_cmos 00:02: setting system clock to 2014-09-07 08:11:48 UTC (1410077508)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 808K (ffff880001736000 - ffff880001800000)
Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
systemd-udevd[173]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: irq 67 for MSI/MSI-X
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq led clo pio slum part ems apst
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfb13d000 port 0xfb13d100 irq 67
ata2: SATA max UDMA/133 abar m2048@0xfb13d000 port 0xfb13d180 irq 67
ata3: SATA max UDMA/133 abar m2048@0xfb13d000 port 0xfb13d200 irq 67
ata4: SATA max UDMA/133 abar m2048@0xfb13d000 port 0xfb13d280 irq 67
ahci 0000:00:1f.2: irq 68 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
ata5: SATA max UDMA/133 abar m2048@0xfb136000 port 0xfb136100 irq 68
ata6: SATA max UDMA/133 abar m2048@0xfb136000 port 0xfb136180 irq 68
ata7: DUMMY
ata8: DUMMY
ata9: DUMMY
ata10: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 69 for MSI/MSI-X
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:36:e9:d7
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: WDC WD40EZRX-00SPEB0, 80.00A80, max UDMA/133
ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-8: ST33000651AS, CC43, max UDMA/133
ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD40EZRX-00S 80.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
ata3.00: configured for UDMA/133
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Direct-Access ATA ST33000651AS CC43 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: ATA-7: Maxtor 6V200E0, VA111630, max UDMA/133
ata4.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA Maxtor 6V200E0 VA11 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 398297088 512-byte logical blocks: (203 GB/189 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: Attached scsi generic sg3 type 0
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: HL-DT-ST BD-RE WH14NS40, 1.02, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM HL-DT-ST BD-RE WH14NS40 1.02 PQ: 0 ANSI: 5
ata6.00: ATA-8: OCZ-VERTEX2, 1.33, max UDMA/133
ata6.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
sdc: sdc1 sdc2
sd 2:0:0:0: [sdc] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg4 type 5
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.33 PQ: 0 ANSI: 5
sd 5:0:0:0: [sde] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2 < sde5 >
sd 5:0:0:0: [sde] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
sdb: sdb1 sdb2 < sdb5 >
hub 1-1:1.0: 6 ports detected
sd 1:0:0:0: [sdb] Attached SCSI disk
sdd: sdd1 sdd2 sdd3 < sdd5 >
sd 3:0:0:0: [sdd] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-10: new low-speed USB device number 2 using xhci_hcd
usb 3-10: New USB device found, idVendor=06a3, idProduct=8021
usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-10: Product: Saitek Eclipse II Keyboard
usb 3-10: Manufacturer: Chicony
usb 3-10: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-10: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Chicony Saitek Eclipse II Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input5
hid-generic 0003:06A3:8021.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:14.0-10/input0
input: Chicony Saitek Eclipse II Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/input/input6
hid-generic 0003:06A3:8021.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:14.0-10/input1
usb 3-13: new high-speed USB device number 3 using xhci_hcd
usb 3-13: New USB device found, idVendor=0424, idProduct=2514
usb 3-13: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-13:1.0: USB hub found
hub 3-13:1.0: 4 ports detected
usb 3-14: new low-speed USB device number 4 using xhci_hcd
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-14: New USB device found, idVendor=045e, idProduct=0023
usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14: Product: Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae
usb 3-14: Manufacturer: Microsoft
usb 3-14: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Microsoft Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/input/input7
hid-generic 0003:045E:0023.0003: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae] on usb-0000:00:14.0-14/input0
usb 3-13.1: new high-speed USB device number 5 using xhci_hcd
usb 3-13.1: New USB device found, idVendor=0424, idProduct=2640
usb 3-13.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-13.1:1.0: USB hub found
hub 3-13.1:1.0: 2 ports detected
random: nonblocking pool is initialized
usb 3-13.1.1: new high-speed USB device number 6 using xhci_hcd
usb 3-13.1.1: New USB device found, idVendor=0424, idProduct=4064
usb 3-13.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-13.1.1: Product: Ultra Fast Media Reader
usb 3-13.1.1: Manufacturer: Generic
usb 3-13.1.1: SerialNumber: T11000006924
usb-storage 3-13.1.1:1.0: USB Mass Storage device detected
scsi10 : usb-storage 3-13.1.1:1.0
usbcore: registered new interface driver usb-storage
scsi 10:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.90 PQ: 0 ANSI: 0
sd 10:0:0:0: Attached scsi generic sg6 type 0
sd 10:0:0:0: [sdf] Attached SCSI removable disk
EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
Adding 3227644k swap on /dev/sde5. Priority:-1 extents:1 across:3227644k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (sde1): re-mounted. Opts: discard,errors=remount-ro
systemd-udevd[440]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
wmi: Mapper loaded
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPE0 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIV 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
mei_me 0000:00:16.0: irq 70 for MSI/MSI-X
systemd-udevd[512]: renamed network interface eth0 to eth1
snd_hda_intel 0000:00:1b.0: irq 71 for MSI/MSI-X
hda_codec: ALC1150: SKU not ready 0x00000000
autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x00000000 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
type=1400 audit(1410077511.814:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=735 comm="apparmor_parser"
type=1400 audit(1410077511.814:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=735 comm="apparmor_parser"
type=1400 audit(1410077511.814:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=735 comm="apparmor_parser"
type=1400 audit(1410077511.814:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=731 comm="apparmor_parser"
type=1400 audit(1410077511.814:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=731 comm="apparmor_parser"
type=1400 audit(1410077511.814:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=731 comm="apparmor_parser"
type=1400 audit(1410077511.814:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=735 comm="apparmor_parser"
type=1400 audit(1410077511.814:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=735 comm="apparmor_parser"
type=1400 audit(1410077511.814:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=731 comm="apparmor_parser"
init: failsafe main process (794) killed by TERM signal
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (979) killed by HUP signal
init: cups main process ended, respawning
init: samba-ad-dc main process (1008) terminated with status 1
init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
e1000e 0000:00:19.0: irq 69 for MSI/MSI-X
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.117 Tue Nov 26 21:25:36 PST 2013
init: gdm main process (1160) killed by TERM signal
e1000e 0000:00:19.0: irq 69 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
init: udev-fallback-graphics main process (1487) terminated with status 1
/dev/vmmon[1579]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[1579]: Module vmmon: initialized
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=56)
Initialized host personality
NET: Registered protocol family 40
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth1: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
/dev/vmnet: open called by PID 1727 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth1: up
bridge-eth1: attached
/dev/vmnet: open called by PID 1735 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1749) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
/dev/vmnet: open called by PID 1737 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1757 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
userif-3: sent link down event.
userif-3: sent link up event.
/dev/vmnet: open called by PID 1758 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 1761 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
init: plymouth-stop pre-start process (1868) terminated with status 1
userif-3: sent link down event.
userif-3: sent link up event.
userif-3: sent link down event.
userif-3: sent link up event.
audit_printk_skb: 192 callbacks suppressed
type=1400 audit(1410077541.967:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3390 comm="apparmor_parser"
type=1400 audit(1410077541.967:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3390 comm="apparmor_parser"
type=1400 audit(1410077541.967:77): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3390 comm="apparmor_parser"
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
usb 3-14: USB disconnect, device number 4
usb 3-14: new low-speed USB device number 7 using xhci_hcd
usb 3-14: New USB device found, idVendor=045e, idProduct=0023
usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14: Product: Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae
usb 3-14: Manufacturer: Microsoft
usb 3-14: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Microsoft Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/input/input17
hid-generic 0003:045E:0023.0004: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae] on usb-0000:00:14.0-14/input0
perf samples too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 3-14: USB disconnect, device number 7
usb 3-14: new low-speed USB device number 9 using xhci_hcd
usb 3-14: New USB device found, idVendor=045e, idProduct=0023
usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14: Product: Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae
usb 3-14: Manufacturer: Microsoft
usb 3-14: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Microsoft Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/input/input18
hid-generic 0003:045E:0023.0005: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae] on usb-0000:00:14.0-14/input0
usb 3-14: USB disconnect, device number 9
usb 3-14: new low-speed USB device number 10 using xhci_hcd
usb 3-14: New USB device found, idVendor=045e, idProduct=0023
usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14: Product: Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae
usb 3-14: Manufacturer: Microsoft
usb 3-14: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Microsoft Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/input/input19
hid-generic 0003:045E:0023.0006: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae] on usb-0000:00:14.0-14/input0
usb 3-14: USB disconnect, device number 10
usb 3-14: new low-speed USB device number 11 using xhci_hcd
usb 3-14: New USB device found, idVendor=045e, idProduct=0023
usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14: Product: Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae
usb 3-14: Manufacturer: Microsoft
usb 3-14: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Microsoft Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/input/input20
hid-generic 0003:045E:0023.0007: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae] on usb-0000:00:14.0-14/input0
usb 3-14: USB disconnect, device number 11
usb 3-14: new low-speed USB device number 12 using xhci_hcd
usb 3-14: New USB device found, idVendor=045e, idProduct=0023
usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14: Product: Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae
usb 3-14: Manufacturer: Microsoft
usb 3-14: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Microsoft Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/input/input21
hid-generic 0003:045E:0023.0008: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Optical\xffffffc2\xffffffae\xffffffae] on usb-0000:00:14.0-14/input0